Materials
Materials
Choose the right material
A practical comparison of the materials available for custom 3D printing.
| Material | Best for | Hardness | Flexibility and impact | Temperature resistance | Moisture and chemicals |
|---|---|---|---|---|---|
| PLA | Prototypes, decorative parts and detailed models | Very hard; less resistant to strong impacts | Rigid; less resistant to strong impacts | Low (up to 45–55 °C) | Low / medium |
| PETG | Cases, mounts and everyday functional parts | Strong and slightly flexible | Good for impacts and moderate bending | Medium (up to 70–80 °C) | Good resistance to moisture and household chemicals |
| ABS | Technical parts and protective cases | Strong and rigid | Good impact resistance | High (up to 85–100 °C) | Good; depends on the chemical |
| TPU | Gaskets, feet, covers and flexible parts | Soft and elastic | Excellent for bending and stretching | Medium (up to 60–80 °C) | Good resistance to wear and oils |
| PC | Load-bearing parts and parts near heat | Very strong | Very high impact resistance | Very high (up to 110–120 °C) | Good against oils and many household substances |
| PCTG | Strong cases and impact-resistant functional parts | Strong and slightly flexible | Usually tougher and less brittle than PETG | Medium / high (up to 75–85 °C) | Very good chemical resistance |
Values are approximate and depend on the filament brand, part design, wall thickness, infill and print direction.
Looking for a ready-made model? Explore 3D printed products in our shop.